Main -> Products -> Electronics -> Multi Channel Analyzer MS Hybrid
Multi Channel Analyzer MS Hybrid
APPLICATION

Amplification, optimal filtering, analog-digital conversion of signal from semiconductor detectors of ionizing radiation, the accumulation of spectra and transfer to a PC via an RS-232 or USB, the formation of the necessary voltages for detecting units (high voltage for semiconductor detector and power for preamplifier). Hybrid is designed to work with HPGe or SiLi detectors produced by Baltic Scientific Instruments or other manufacturers.

FEATURES
  • High speed;
  • Low self-noise;
  • Analog signal processing of the spectrometric signal;
  • Rejection of superimposed pulses and taking into account the dead time of the spectrometer;
  • High linearity of the amplifier path;
  • Simultaneous registration of signals in the eight energy ranges;
  • Via PC or manual control of the spectrometer;
  • Switch on and off collecting spectra for a preset time;
  • Collecting spectrum by "live" or real-time;
  • Setting the number of channels by software;
  • The possibility of energy calibration;
  • Definition of energy resolution, centroids of the peaks of total absorption and peak areas with and without taking into account the background under the peak;
  • Works with I/O ports RS-232 or USB;
  • Compatibility with spectra processing software LSRM, SpectraLine, ANGAMMA, AXILL.
COMPLETE SET
  • Analog processor - ADC;
  • Microprocessor unit with memory and I/O port RS-232 or USB;
  • Power supply for detector and preamplifier;
  • Cable set;
  • Emulation software.
TECHNICAL CHARACTERISTICS

Parameter

Value

ADC conversion time, ms

7

Number of channels

1024,2048, 4096,8192,16384

Channel capacity

232-1

Gain, adjustable (manual transmission)
   gradually
   roughly *
 
1 -2,5
Х1, Х2,Х4,Х8

Noise level (adducted to the entrance), mV

<5

Integral non-linearity, %

<0.04

Temperature instability, %/°С

<0.01

Shaping time constants (switchable)**, ms

1-16

Output load frequency control (for each of the outputs)

TTL

Power supply rangeV

+/- 0-5000

Dimensionsmm

305x210x85

Weight, kg
Power consumption, W
Supply voltage, V
Frequency, Hz
2,8
<10
220
50
* 4 fixed settings are set by the manufacturer depending on the detection unit.
 ** 2 fixed settings are set by the manufacturer depending on the detection unit.

For additional information, please contact us: sales@bsi.lv
Ganibu dambis 26, P.O.Box 33, LV-1005, Riga, Latvia
Tel.(+371)67383947, Fax (+371)67382620